[Chrysler300] 64 VS 63 FAN CLUTCH

["Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

  Thanks for the  letters , club members,  concerning AC for 64, stats, and motor mounts.

1- I had to shim front motor mounts almost 1/4" for the 7 blade fan to clear the shroud.

Brother Don is having a set made at Now and Then in Weymouth, MA.

2- Replaced 160 with 180 stat.

3- trips to local Napa were fruitless for new thermal clutch unit.

4- Brother Jamie gave the Hayden 2765 number which slips right into his J.

   So,

5- My last trip to Napa was to return a 440 unit. which was too long in overall length.

6-The fluid clutch replacement was as tight s the one I removed from the pump.

   The overall height is a mil over 3". 

The one for the J is 2.03 overall height, which Napa found

 The original 4 blade fan and new 2 core radiator & goose neck are stored, as they are OEM.

Will find out if Mr. Napa can deliver.

Thanks for all the stories and heads up!

Dave in VA.

__._,_.___

---

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___