Re: [Chrysler300] Speedometer pinion gear for 300G

["John Holst jholst@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Does this sound like a project for the reproduction
department? With the advances of digital printing techniques if we had an
assortment of the various gears they could be reproduced and made
available to all perhaps fairly reasonable. The problem would be to
collect the right assortment of gears and then find a source to make them
using one of the new computer printing devices. If they can do this on
the space station and at Jay Leno's it might work here. Maybe that this
is just fantasy, but it is a thought. John...

At 10:17 AM 7/18/2015, you wrote:

 


Yes, the odometer registers the correct mileage. Having checked that and the gear for being the correct one, it left the speedometer needing calibration as the culprit. I have never bothered with it, as I make the adjustment mentally as I drive (and assisted by a radar detector ... lol).

Mike
President Obama:  I am not incompetent. I am destroying America more quickly than anyone thought possible.

----- Original Message -----

From: Fern Rivard

To: Michael Reed ; chrysler300@xxxxxxxxxxxxxxx

Sent: Saturday, July 18, 2015 10:25 AM

Subject: Re: [Chrysler300] Speedometer pinion gear for 300G

Michael, does your speedometer show the distance travelled correctly against a marked mile? If that is correct, then youâ??re correct that your speedo needs calibration.

Fern

 

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Saturday, July 18, 2015 3:20 AM

To: chrysler300@xxxxxxxxxxxxxxx

Subject: Re: [Chrysler300] Speedometer pinion gear for 300G

 

 

My "F" has the proper gear for the rear axle ratio of the car, but reads 12 mph slow at highway speeds. It has been off that far since I obtained the car in 1979. I always attributed it to the speedometer being out of calibration........

Mike

----- Original Message -----

From: mailto:jholst@xxxxxxxxx [Chrysler300]

To: John Nowosacki

Cc: chrysler300@xxxxxxxxxxxxxxx

Sent: Friday, July 17, 2015 1:51 PM

Subject: Re: [Chrysler300] Speedometer pinion gear for 300G

 

 

As a check of the speedometer I have used a portable GPS readout (hand held). My RAM Charger is on it's third speedometer and reads about 10 mph slow at 55. I'm sure that somewhere I got the wrong cable or gear or something, but for pushing snow it works. John Holst ( i have a sign on the dash that warns people not extend arms outside the window at speeds above 120 mph)

At 12:14 PM 7/17/2015, you wrote:

What does it read when you're doing 120? ;-)

On Fri, Jul 17, 2015 at 12:57 PM, 'Bob Jasinski' rpjasin@xxxxxxxxxxx [Chrysler300] < mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Ã? 

I'm trying to determine the proper speedometer pinion gear for my 300G.Ã?  My speedo reads lower than it should and I'd like to see if I can improve its accuracy, at 40 mph I'm actually doing about 45.Ã?  I'm running 235/75R15 tires and a 2.93 rear axle.Ã?  Any suggestions on the proper gear? I know they come in different colors to differentiate different ratios.

Ã?

Thanks!

Ã?

Bob J

Ã?

__._,_.___

---

Posted by: John Holst <jholst@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 2

• Privacy • Unsubscribe • Terms of Use

__,_._,___