Re: [Chrysler300] 300C Brakes

["2HsandaHeritage@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Oddvin,

I had the same problem when rebuilding the drum brakes on my H.

The problem was the amount of free play between the power brake push rod and the master cylinder.

Several tries at slightly increasing the free play solved the problem.

Doug Warrener

---

From: "Oddvin Skråmestø oddvin@xxxxxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: "Chrysler300" <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Wednesday, September 30, 2015 12:06:00 PM
Subject: [Chrysler300] 300C Brakes

 

Hello.

I have replaced the mastercylinder, and serviced the wheelcylinders on my 300C. And I have adjusted the brakes according to the sevice manual.

It seems like there are still pressure present in the system after the brakes are released. The brakes are dragging.

I forgot to check the free play between the push rod, and mastercylinder. I hope the pedal free play adjustment will do the trick. Otherwise I’m out of good ideas.

I will try this on friday night, and I’m hoping to use the car on saturday at the end of season cruisin’.

Any ideas?

 

Oddvin

300C in Norway

__._,_.___

---

Posted by: 2HsandaHeritage@xxxxxxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 2

• Privacy • Unsubscribe • Terms of Use

__,_._,___