|
Thanks Carl – I did some digging on the Lars site and it appears that they use the same pump for 1961-68 300’s. To your point, the reservoir may be different
depending on year. Based on this, as long as your reservoir is good, one should be able to use any of the 61-68 years as a good core. From: C Bilter [mailto:cbilter@xxxxxxxxx]
Mark, I believe that the cap to which you are referring is from a later pump (1965). The reservoir neck is also a little different to accommodate that style cap. That reservoir
will fit the ‘61 ps pump, but would not be the correct style cap as far as I know. Carl B. Sent: Saturday, November 14, 2015 10:08
AM Subject: [Chrysler300] 1961 Power Steering
Pumps
Did Chrysler use two models of pumps in 1961? While my PS pump was out being rebuilt I was able to locate a replacement but it had no cap. Thinking I could use my old
cap I assumed it was no problem. Unfortunately, the old cap is too large. When I look online it appears that there may have been a second supplier of pumps that used a cap with tabs on it (like a radiator cap). __._,_.___ Posted by: "Knutsen, Mark" <Mark.Knutsen@xxxxxxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap