Re: [Chrysler300] Pinion seal for a C

["Keith Boonstra kboonstra@xxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

NAPA is saying it's a #18880. That's also a FedMogul number. They are going to order one in, and we shall see.

Thanks all.

Keith

-

On Mon, Aug 22, 2016 at 10:40 AM, John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:

I think all 300C’s are 8 ¾ axles, but there are different pinion stub diameters, but not during/ in 57? From memory,.  Seal for 8 ¾ should be right.

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@yahoogroups.com] On Behalf Of kboonstra@xxxxxxxxxxxx [Chrysler300]
Sent: Monday, August 22, 2016 9:57 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Pinion seal for a C

 

Good morning, 

 

To avoid the need to call out the HazMat team to follow me on my upcoming trip to the Elkhart Lake meet, I'm going to have to either put a diaper under my (C's) rear end, or plug a leak.

 

Carquest shows 2 different pinion seals for 1957 Chrysler - for 8-3/4 and 8-1/4 rings. Can someone please give me the original Chrysler part number, or perhaps the ring size? Carquest says the 8-1/4 takes a National 5126. I want to make sure they have the right one on hand when we schedule the repair so your help is appreciated.

 

Thanks.

 

Keith Boonstra

-

__._,_.___

---

Posted by: Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___