|
Hi to all, We have successfully installed Wilwood Disc Brake upgrades on my 300-F Convertible. The following are the disc brake upgrades now available for our 300s:
Since my car has 15” wheels that accept 14” standard hubcaps we were able to use the larger rear kit with 12.9” rotors (140-10767-D). For 14” wheels there is a smaller kit with 11” rotors (140-11386-D). For 1962 and earlier 8 3/4” rears, the bolt pattern of the backing plate must be redrilled to match. 1963 and later 8 3/4” rear flanges with flattened top fit the bolt pattern supplied. Wilwood requires new green bearings to be pressed on to the rear axles. They supply clips to secure the bearings. Both Wilwood rear kits have emergency brakes. If you still have the e-brake on the end of the tranny, you do not have to use the Wilwood set-up. If you want to upgrade, you can connect to them. Requires Lokar front universal kit with special order longer cable and Willwood rear e-brake cable kit. The e-brake has brake linings that engage the inside of the rotor hat. Front Wilwood kits require Wilwood front brake lines with banjo fittings. Will be writing up a tech article with photos in the near future. Will post the link. Tony Rinaldi
__._,_.___ Posted by: Tony Rinaldi <awrdoc@xxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap