Re: [Chrysler300] Water Pump Housing Casting #
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Water Pump Housing Casting #

Watch out .. all kinds of problems in early days with steel director plates in back different pump impeller set depths  etc  . Add in AC variations. They will sell you a 440 pump every time  will not cool early b block right .. sometimes . School of hard knocks not casting numbers . 
I would buy a late performance pump and casting , maybe aluminum — paint up , know you have right mix . Lots of bad info out there as you have found out . About 6 wrong combinations possible . 

Sent from my iPhone not by choice 

On 9 Aug 2019, at 12:17 pm, sonoramic413@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Can anyone tell me what the correct casting number is for a '61 Non-A/C big block (413) water pump housing is? I keep seeing conflicting info out on the internet....

Thanks everyone....


Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.