
[Chrysler300] 1957 Rear axle casting nr
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Chrysler300] 1957 Rear axle casting nr
- From: "wa355rxet6fjmnj7hrejj254w6xpxomgc2lcmtme@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
- Date: 31 Aug 2019 20:06:43 +0000
Howdy
Just back from down under my 300c conv, now looking for inputs about my rear axle.. Any idea on this setup? mid section has the cross cast on the passanger side On flat area center section passanger side we read stamped 3:15
Driver side casting reads .4. (A) in an circle and cast nr reads 1820657.
Any idea if this is the original or not? my tranny was not, was an 58service R tranny...has had a go on and off several times..
Not anything on bolts fastners etc tells rear end has been out of car before,, any idea?
Thanks //2x300c
Michael
..
------------------------------------
Posted by: wa355rxet6fjmnj7hrejj254w6xpxomgc2lcmtme@xxxxxxxxx
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Back to the Home of the Forward Look Network
Archive Sitemap