Re: [Chrysler300] 64 K neutral starting switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 64 K neutral starting switch





OK, I just found out that yes, 64 K with console shifter takes the 65 and up switch as per AMS Obsolete.
On 08/13/2020 3:15 PM ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


 


Has anyone ran into a problem finding the correct replacement of the neutral starting switch for the 64 K 727 with floor shifter?

I just tried a new switch which both the 63 and 64 parts manual called for, 1704 283 and it is much too short to reach the two tangs internally. I even took the washer and O ring off, no dice.

The old switch I took out was short as well! The PO jumped the solenoid so the car started in any gear.

Allan




__._,_.___

Posted by: ALLAN POZDOL <apozdol@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.