{Chrysler 300} Jack hold down nut

[<finsruskw@xxxxxxxxxxxxxxx>]

All I would need is a good quality drawing (print) (photo even) of the part w/spec’s to make these.

I.D. O.D, height etc.

Looks pretty straight forward

I am assuming 1/4” female coarse thread.

 

Dave Schwamdt

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/0e6d01d7cf2b%24faef5050%24f0cdf0f0%24%40iowatelecom.net.