Re: {Chrysler 300} 58 300D jack

[Bob Podstawski <bobp8@xxxxxxxxxxxxx>]

Good morning all. Once again on putting out a plea for a picture of the bumper jack parts and proper trunk stowage for my D. These are the last details in need to tidy up this awesome unit…. Thanks in advance.

Bob Podstawski

Butler, NJ

C300

300D 

On Nov 1, 2021, at 10:23 AM, finsruskw@xxxxxxxxxxxxxxx wrote:



All I would need is a good quality drawing (print) (photo even) of the part w/spec’s to make these.

I.D. O.D, height etc.

Looks pretty straight forward

I am assuming 1/4” female coarse thread.

 

Dave Schwamdt

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/0e6d01d7cf2b%24faef5050%24f0cdf0f0%24%40iowatelecom.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E7030AED-AB4B-4724-BE7A-365A7089B4AC%40optonline.net.