Re: {Chrysler 300} F console arm rest lid survey

The 3-D printing drawing I sent you came to me with a 3-D printed exact duplicate of the stud, which I have re-located amongst my stuff. If someone among us wants to have them made I'm happy to send them my prototype stud so we can have these available for those who need them.

-----Original Message-----
From: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, December 21, 2021 7:43pm
To: dplotkin@xxxxxxxxxxxxxxxxxxx
Cc: "Bob Merritt" <bob@xxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} F console arm rest lid survey

nice job on that !! jkg
On 21 Dec 2021, at 7:41 pm, dplotkin@xxxxxxxxxxxxxxxxxxx wrote:

See attached 3D diagram of said and illusive stud.

Danny Plotkin

-----Original Message-----
From: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, December 21, 2021 3:54pm
To: dplotkin@xxxxxxxxxxxxxxxxxxx
Cc: "Bob Merritt" <bob@xxxxxxxxxxxxx>, "Chrysler list server" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} F console arm rest lid survey

that should be easy for a machinist to make ? I remember those too , seem to grab top a little too tight ?

Sent from my iPhone not by choice

On 21 Dec 2021, at 3:24 pm, dplotkin@xxxxxxxxxxxxxxxxxxx wrote:

When my car arrived the ball studs that screw to the console lids were missing and a prior owner substituted machine screws which were terrible. I spoke to Gary Goers who managed to find and send me one. I used that to have a 3D printed version made and that is as far as I got with that before I found a second ball stud.

My understanding which is likely imperfect is that the ball stud arrangement was F only and that the G did not use the ball stud. I believe I remember Gary saying they changed and that the ball stud is among the hardest to find part for the F. I searched every hardware supplier I could find to no avail.

Danny Plotkin

-----Original Message-----
From: "Bob Merritt" <bob@xxxxxxxxxxxxx>
Sent: Tuesday, December 21, 2021 2:50pm
To: "Chrysler list server" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} F console arm rest lid survey

We'd like to do a survey on F owners
regarding their console arm rest covers.

See http://www.chrysler300club.com/tech/Fconsole/lid.html

Please let me know at bob@xxxxxxxxxxxxx
if you have a latch or not and include your
VIN and/or build date.

I will make a table similar to the one we
did for the drain tube survey
and will post the results.

I have never seen a G or H with a latch lid
but if you have one, give a shout.

Thanks for playing.
Boosted Bob

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/61C2300E.4010202%40simplexco.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1640118245.161328363%40apps.rackspace.com.