Re: {Chrysler 300} F console arm rest lid survey

On Tue, Dec 21, 2021 at 7:05 PM Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

White 300F 8403129501 with 0114 scheduled production date - Both have them.
Black 300F 8403150442 with 0509 scheduled production date - Only in the rear

Another difference. Early car had tan rear armrest bases with tan pad. Later car has tan bases with black pad.

Early car had black kick panels. Later car has tan ones.

On Tue, Dec 21, 2021 at 4:41 PM <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:
See attached 3D diagram of said and illusive stud.

Danny Plotkin

-----Original Message-----
From: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, December 21, 2021 3:54pm
To: dplotkin@xxxxxxxxxxxxxxxxxxx
Cc: "Bob Merritt" <bob@xxxxxxxxxxxxx>, "Chrysler list server" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} F console arm rest lid survey

that should be easy for a machinist to make ? I remember those too , seem to grab top a little too tight ?

Sent from my iPhone not by choice

On 21 Dec 2021, at 3:24 pm, dplotkin@xxxxxxxxxxxxxxxxxxx wrote:

When my car arrived the ball studs that screw to the console lids were missing and a prior owner substituted machine screws which were terrible. I spoke to Gary Goers who managed to find and send me one. I used that to have a 3D printed version made and that is as far as I got with that before I found a second ball stud.

My understanding which is likely imperfect is that the ball stud arrangement was F only and that the G did not use the ball stud. I believe I remember Gary saying they changed and that the ball stud is among the hardest to find part for the F. I searched every hardware supplier I could find to no avail.

Danny Plotkin

-----Original Message-----
From: "Bob Merritt" <bob@xxxxxxxxxxxxx>
Sent: Tuesday, December 21, 2021 2:50pm
To: "Chrysler list server" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} F console arm rest lid survey

We'd like to do a survey on F owners
regarding their console arm rest covers.

See http://www.chrysler300club.com/tech/Fconsole/lid.html

Please let me know at bob@xxxxxxxxxxxxx
if you have a latch or not and include your
VIN and/or build date.

I will make a table similar to the one we
did for the drain tube survey
and will post the results.

I have never seen a G or H with a latch lid
but if you have one, give a shout.

Thanks for playing.
Boosted Bob

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/61C2300E.4010202%40simplexco.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1640118245.161328363%40apps.rackspace.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1640133699.67128225%40apps.rackspace.com.