Re: {Chrysler 300} Torsion Bars

[RON WATERS <ronbo97@xxxxxxxxxxx>]

Yes. What Don said.

Chrysler discovered this issue mid-57 model year. They sold a makeshift pair of foam rubber seals with a nylon tie to seal up the ends, after greasing, until they could release the boot Don mentions. I have a Plymouth TSB that describes this, as well as a pair of the seals with tie in the original box.

Ron

On 02/18/2022 12:30 PM 'Donald Verity' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

When the 57's came out they had no boot on the cross member end, so debris would get in there and rust out the bar, especially in the snow belt states. 58 put a boot in and you greased the ends also. Myself, I've never had one break

Don

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1836791742.886966.1645208023924%40connect.xfinity.com.