The bush button transmissionMechanism attaches to the dash with two nuts. Just remove the chrome button bezel and you will see them.Then mech can just be movedOut of the way no need toDetach cable from push button control.Bob HaagOn Mar 2, 2022, at 9:06 PM, kurt.brueske <kurt.brueske@xxxxxxxxx> wrote:Dear club members -I plan to remove the dashboard from my 1962 300H address original paint that has failed with age -- owing to its inherent beauty, it deserves to look better. I've done some limited research and have identified the various bolts that secure it in place (e.g., near the windshield and kick panels), but one item in particular appears troublesome -- where the transmission cable attaches to the back of the push-button selector. I've attached a reference picture from a spare dashboard that I acquired from a donor car.It looks as though there is be pin where the transmission cable attaches to the selector - is the best course of action to disconnect the cable at this point or is there a better solution? From the limited analysis I've done, it doesn't appear that the selector panel detaches from the dash (if so, I wouldn't have to remove the cable from the pin).Appreciate any and all help!Thanks,Kurt--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/71de2041-ed62-4498-9d43-3298ab55c7een%40googlegroups.com.