Re: {Chrysler 300} Cross Ram part( vacuum anti stall device)
From: John Grady <jkg@xxxxxxxxxxxxxxxxx>
Date: Tue, 7 Jun 2022 07:14:07 -0400
These are very similar if not identical (piston part of it ) to those used on 4 speed mopar —- like road runner , cuda etc around 69-70 as anti stall devices , —-but the mount is different . They are being reproduced for those .
Some careful rework of the mount foot would seem to get you a functional device , although I have not done that .
With AC this function probably gets pretty important as compressor load comes and goes .
One BIG heads up , if you grab the nut or screw and start “ adjusting “ it , it has no resistance to twisting torque inside the device and you immediately tear the fragile diaphram , destroying it . You MUST hold the flat on the shaft with a wrench and carefully keep from any twisting it . ( two wrenches )
That is why they are all no good . I did that too long ago . So it may not be the device —-even a new one —- that is “ bad” it is how it was installed .. or adjustment attempted
John
Sent from my iPhone
On Jun 7, 2022, at 6:18 AM, Allan Klotz <allan.klotz@xxxxxxxxxxxxxxx> wrote:
Hi
To all that answered my e-mail about this subject, thank you very much for your assistance.
Thanks
Allan
From: 'Randy Guyer' via Chrysler 300 Club International [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] Sent: 6. juni 2022 20:53 To: finsruskw@xxxxxxxxxxxxxxx; 'Allan Klotz'; 'Chrysler list server' Subject: RE: {Chrysler 300} Cross Ram part
I’ve bought a couple from Jeff Carter through the years with good luck.
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of finsruskw@xxxxxxxxxxxxxxx Sent: Monday, June 6, 2022 1:14 PM To: 'Allan Klotz' <allan.klotz@xxxxxxxxxxxxxxx>; 'Chrysler list server' <chrysler-300-club-international@xxxxxxxxxxxxxxxx> Subject: RE: {Chrysler 300} Cross Ram part
Anti stall pot.
Been NSI for like forever.
Any you find now that are NOS will most likely LEAK and not function properly.
Ask me how I know this and vendors WILL not test or warranty them!!
