Hello All, At the suggestion of Noel Hastalis, I contacted “Steer & Gear” in Ohio and spoke with Carmen regarding the coupling. The part is only around $20, but he told me that it could take up to 6 hours of labor to change the coupling. He also said a helper may be required and of course the right tools to do the job. 300ly, Mark Lindahl From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of mplindahl@xxxxxxxxxxxxx Hello All, I found the discussion about steering wheel play very interesting and one of the factors could be a worn out steering column coupling and not the steering gear box. I looked at the ’63 parts manual and I found a part called “coupling” and the part number is 1850524. Is this the right part number for this coupling? Section 19-15-0 “Steering Gear Tube and Coupling” There was not an enlarged picture in my parts book showing individual pieces. Does anyone know a good place to buy one of these? Thank you. 300ly, Mark Lindahl ’63 300 Conv. -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/04e901d8d986%24dfcfeb20%249f6fc160%24%40sbcglobal.net. |
Back to the Home of the Forward Look Network
Archive Sitemap