Re: {Chrysler 300} Xout to slipover rear drums '57-'64.

[William Huff <whuff@xxxxxxxxxx>]

That is very interesting, and answers some questions I have had for years, so the axle doesn't have to change, good..  Now I wonder if I can just substitute a later backing plate with the later brakes for the dual brake cylinder set up on my 58 300.  There may be some spacing issues between the later drums and the older tapered axle drums.

Bill Huff

On 10/23/2022 9:25 PM, Rich Barber wrote:

Interesting video on converting ’57-’64 tapered rear drums to ’65 & later slip-on.  New to me, but seems to make sense.  Not sure if works with 3” rear drums.

 

https://tinyurl.com/2ksfrxvz

 

Rich B. in Brentwood.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/001301d8e747%2484cb2630%248e617290%24%40ez2.net.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/11586bf8-3732-9bbd-239c-4bf36b16be28%40cfl.rr.com.