RE: {Chrysler 300} Exhaust 300K
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Exhaust 300K



I see you got a mixed bag on Waldron. Here's my take:

 

They built an entirely new system for my F, end to end in 2019. All I had to do is convince them that it doesn't use resonators. The system shipped and went in fine. I had to call for a hanger which they supplied without fuss. 

 

The built a system for my 56 Cadillac, duals, resonators and rear bumper outlets. That system went in like butter. 

 

A system for my 60 Buick from Waldron was a little more complicated and I ended up in Nick's shoes having to make remedial bends. 

 

Let's remember that the cars are 60+ years of age with lots of events that may have altered dimensional values. It is probably not reasonable to expect a newly minted set of bent pipes to fit every car the same way. 

 

Try hanging a bumper on your car that came from another one, they don't always fit like butter for the same reasons. 

 

In my view Waldron is the place to go.

 

Danny Plotkin

-----Original Message-----
From: "'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Friday, December 23, 2022 7:03pm
To: "Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx)" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Exhaust 300K

Has anyone purchased one of the mail order exhaust systems out there? If so, I would like to your experiences with that.

 

There are only a couple of custom exhaust places left around the Bay Area and I have not had the best of luck with them, even at a high price. They tend to be in a hurry and their Q&A is lacking. They do not take the time to make sure that there is good clearance from items and down the road if a mount compresses a little next thing you know you have something rubbing. They also all want to weld everything and if you have to pull and engine or trans that is a PITA.

 

I will need a new all Stainless Steel exhaust at some point for the 300K. The header pipes are not looking too good and it is almost rubbing on the torsion bar.

 

Thanks for anyone’s experiences with the mail order houses on this.

 

Best to everyone for Christmas. 

 

James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61714B3ED8A7CF5D380BE28493EE9%40CY5PR19MB6171.namprd19.prod.outlook.com.



 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1671901239.04469091%40apps.rackspace.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.