Thanks Bob! Just what I needed. James
From: Bob Merritt <bob@xxxxxxxxxxxxx>
Sent: Saturday, December 31, 2022 04:41
To: James Douglas <jdd@xxxxxxxxxx>
Subject: Re: {Chrysler 300} 300K single 4 BBL air cleaner rod
Overall length 6-5/16"
Diameter .218"
threads are 1/4-20 top and bottom.
Threaded sections are 1/2" and 1-1/8"
On 12/30/2022 12:14 PM, 'James Douglas' via Chrysler 300 Club International wrote:
Hi all,
I got my stock air cleaner from Murray and have some air filters inbound. But Murray did not include the threaded rod. Can someone take on out of theirs and measure it for me and tell me the diameter and thread pitch? I will order some
threaded rod and cut it to fit.
I vaguely remember that the stock rods were just threaded on the ends. If that is the case then can you also tell me how long the threaded in in both ends. At some point I will get and die some solid rod to duplicate it.
Thanks, James
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61713B8869EEB1EACC94C71793F09%40CY5PR19MB6171.namprd19.prod.outlook.com.