{Chrysler 300} More on steering

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I ran across something interesting on the Imperial Site in one of the service pamphlets.

 

https://www.web.imperialclub.info/Repair/Lit/Master/159/Page20.htm

 

A specification for the force required to push the steering column tube into the coupling on the box. It states that it should take between 3 and 15 pounds of force. If not, they recommend using another nylon square on one side to increase the pressure.

 

I had never seen or ran across anything that talked about how tight that joint is supposed to be.

 

Interesting. I guess I will make up some extra squares and pull out my spring scale and see mow much pressure it takes to pull the column tube into the box.

 

James

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61712C6581E5793697EE73E993C19%40CY5PR19MB6171.namprd19.prod.outlook.com.