Hello all, I have two 62 trunk lids that I would like to see go to some use by someone. I have sent a few emails but gotten no response so I figured I would send another. One was dropped on the front passenger corner and is bent p a bit there. Otherwise pretty decent. The other has a lot of rust at the rear lip. I had hoped to make 1 good one out of them but went a different direction. If anyone is interested I am open to a reasonable offer. I have around $575 in them plus acid dipping of the one with the rust. I can deliver to the spring meet in Hershey if anyone is interested. I am also putting the proper heat riser on my 62 sport dual carb. Does anyone know of a source for the heat tube? I may be able to re bend what I have but it probably won’t come out very well and I don’t know where to get that thermal wrap that was on there from the factory.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/087001d97d1c%24908b60f0%24b1a222d0%24%40escoremx.com. |
Back to the Home of the Forward Look Network
Archive Sitemap
