On Friday, June 2, 2023, 11:04 AM, 'Dan300f' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
Hi all:For what it's worth, I anticipated wheel covers coming off when I first bought my F. A friend of mine had told me of his experience of losing wheel covers on long trips and on winding roads.My solution was to apply extra layers of black paint on the wheels in the areas where the tangs would bite. I also bent the tangs on the covers a bit so they would grab a tighter grip. The bottom line is that the covers are a bit harder to put on and get off, but the end result is not having to find and buy another expensive cover somewhere. 20,000 miles later, I still have the same covers on my wheels.Dan ReitzBell Canyon, CA_______________________________________________________________________
In a message dated 2023/06/01 15:53:00 Pacific Standard Time, rixpac@xxxxxxx writes:These embossed protrusions were to keep the wheel cover in place. If you don't have these, you can line the rim with a good fabric tape. Wheel covers stay in place.Metal valve stems may keep them from spinning off.
Bob J
From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Thursday, June 1, 2023 2:31 PM
To: Keith Langendorfer <keith_a_lang@xxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: RE: {Chrysler 300} Max Wheel Size
Thanks Keith and George.
What tires are you using?
I am tired of chasing the hub caps. I may get a set of 15x7 something with a 4 inch backspace and call it a day as far as wheels go. The brand new 14-inch steel wheels on the car are fine, I am just not interested in restoring a set of factory hubcaps just to see them spit off.
My folks ’64 300K used to lose a cap every now and then when new as well. So, I know it is a long term issues when the cars are driven daily or with sprit.
James
From: Keith Langendorfer <keith_a_lang@xxxxxxxxx>
Sent: Thursday, June 1, 2023 11:49
To: James Douglas <jdd@xxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} Max Wheel Size
James
I have 15x7” Dodge “Police Wheels” on our 300K without any issues. I did try 15x8” wheels on our ‘65 B Body and the outer perimeter would rub on the suspension in the front (no issues on rear fitment.) I don’t know if the same issue would occur on a C Body.
Keith
On Jun 1, 2023, at 2:24 PM, 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
What is the maximum wheel (rim) width people have had on a 1963 – 1964 Body without any clearance issues?
Assume a 15 inch dia.
Thanks, James
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61715146B62A3309F985C65693499%40CY5PR19MB6171.namprd19.prod.outlook.com.--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61714A3ADEE820DCA25D3BE79349A%40CY5PR19MB6171.namprd19.prod.outlook.com.--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/094401d994d3%24cf972620%246ec57260%24%40comcast.net.--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/SA1PR20MB614660B6B4066B8E394B507DD449A%40SA1PR20MB6146.namprd20.prod.outlook.com.--https://groups.google.com/d/msgid/chrysler-300-club-international/446063401.3828523.1685718246028%40mail.yahoo.com
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit.
Back to the Home of the Forward Look Network
Archive Sitemap