Re: {Chrysler 300} 1962 Linkage Finish
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 1962 Linkage Finish



Another excellent product is Harley-Davidson cadmium paint. I've used it a lot over the years. Holds up extremely well. Available at your local Harley dealer. 

On Sun, Nov 26, 2023 at 11:17 AM 'John W Sager' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
If you decide to plate the parts, I've heard nothing but good things about this plater. Dynamic Renovation - Refinishing



I've never had them do any plating, but I have bought some of their reproduction parts and I was very happy with them. They seem to have reasonable prices. Since small Mopar parts seem to be their specialty, I would bet they won't lose yours. 

Hope this helps, John


On Sunday, November 26, 2023 at 01:34:57 PM EST, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:


Oh I never even thought of those Eastwood paints.
Good suggestions (James & Bob) and I am sure MUCH cheaper than taking the linkage parts & pieces to a plating shop & hoping they don’t lose anything!
Thanks All!
Matt Allyn

On Nov 26, 2023, at 9:55 AM, Bob Jasinski <rpjasin@xxxxxxxxxxx> wrote:

James,
 
I’ve used Eastwood’s Silver Cad replication coating spray #100222 with very good results.  Good up to 300 degrees so can be used on under hood components.
 
Bob J
 
From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> 
Sent: Sunday, November 26, 2023 6:33 AM
To: Matt Allyn <allynentertainment@xxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} 1962 Linkage Finish
 
Probably silver cadmium. Perhaps Silver Zinc.
 
In any event, if doing a concourse job, you can get it plated. Cad is the most expensive and the most toxic. Silver zinc is priced ok, but it tends to turn or fade in a couple of years. Some have done a dull nickel plate that holds up well over time. I know several who used it on E-Type suspensions and did it at home.
 
For non-concourse cars I use Eastwood Tank tone paint. It holds up fairly well and goes on without any primer. I use it for brackets and factory nuts and bolts. At about the 10 year point it may need to be repainted if the car is driven a lot.
 
James
 
From: 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> 
Sent: Saturday, November 25, 2023 21:23
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 1962 Linkage Finish
 
Hello,
 
All of the parts & pieces that make up the Throttle Linkage to Trans. Kickdown Linkage…..
How did the cars leave the factory?
Were the parts Cad Plated?
I can’t imagine they were bare metal (as they would have rusted; right?)
Here is a piece that is bare metal; but wondering what it is supposed to be…?
Thanks!
Matt Allyn
 
<image001.jpg>
-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1B49545C-385B-4A50-A268-2B565FB87C19%40yahoo.com.
-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171584AC5CFB314794524ED93BEA%40CY5PR19MB6171.namprd19.prod.outlook.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/007d01da2091%24ca4b7320%245ee25960%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/0E73F768-78B2-43E6-B4D7-82B843D691A7%40yahoo.com
.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1058063068.4344433.1701026232224%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAPxXn40w%2Bc8%2BnvBR9juJsZDaujeXA2gJ%3DxrGHNH6C_NRCeCmTQ%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.