| In theory as long as there is conductive metal between the battery and a device, such as a starter, it is grounded. But the quality of that ground may be insufficient for a starter which draws a lot of amps. I would definitely try connecting a beefy ground down to the block and see what happens. It can be a temporary ground as an experiment.
The heavier the gauge the better. On Jun 27, 2024, at 2:33 PM, Michael Marmorale <michael@xxxxxxxxxxxxx> wrote:
Thank you this is a good point. I have the ground attached to the top of the ac compressor. Should I attach it directly to the block?
When it’s hot the starter barely cranks it moves to motor a fraction of a turn then stops. I have been looking for a local rebuilder. The one I used to use closed down a few years ago.
Michael Marmorale
Sent from my iPhone
Please excuse errors.
On Jun 27, 2024, at 12:17 PM, Charles Schoendorf <cschoend@xxxxxxxxxxxxx> wrote:
I recently read a booklet on hard starting and it emphasized not to overlook the ground from the battery to the block near the starter motor. The circuit is only as good as the weakest link, which is often the ground. Going up on the gauge
(lower number) is something to consider at both poles. Car manufacturers use cables in miles of length and I suspect they go as small a gauge as they can to save costs.
I added a 00 gauge ground cable to a car from the battery in the trunk, all the way up to the engine block. It made a big difference. But any improvement in grounding has to be worthwhile. Then I upgraded the battery grounds in a couple of 6 Volt Hemi
cars and they seem happier too.
Chuck
On Jun 27, 2024, at 11:40 AM, Keith Boonstra <kboonstra.zeegroup@xxxxxxxxx> wrote:
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/19890E35-F85E-460E-BBCD-DBBBFD38CD60%40marmorale.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/EEA04AB9-F95F-440D-AD5E-BE667FC772D8%40optonline.net.
|
Back to the Home of the Forward Look Network
Archive Sitemap