Re: {Chrysler 300} Drive shaft for 300J or 300K using 1965 slip yoke transmission.

["'Donald Verity' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

The 65 trans is one year only, as it has a slip yoke and cable shift. You would need a custom drive shaft. The valve body on console K's and 65 transmissions are also different from push button cars. There is an extra position on the rooster comb. 

Don

Anyone put a 1965 transmission into a 1963 or 1964? If so, did you have to have a custom driveshaft made? I see that the 1965 car has a two inch longer wheelbase so I'd assume that affects the driveshaft.

Thanks, Nick

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFO0CPeGfjHfVh6pfQKi-1D430y2ndb2JyWJwb71La0E3A%40mail.gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1332171726.3021658.1723207665472%40mail.yahoo.com.