|
Hi All, I spent an hour looking for and cannot find the oval head screws that attach the instrument panel upper die cast plate in place. This is the one that goes from the edge of the
dash pad across to the top of the cluster. It uses 3 or 4 MACHINE screws going straight up into the upper dash and has the finish chrome that goes over the top of the cluster. Can someone with a ’64 and perhaps a ’63 pull one of those screws and tell me the length and thread pitch please? I am taking the car to the upholster in the AM to do the headliner and to pad out the dash. Just Dashes and the others do not do ’64 pads so I will have him just upholster the dash
top. I need to have him make sure that the material is not too thick so that the above part will fit correctly. Thanks, James PS. Of course in a week or two I will find zip lock labeled with the four screws in it… For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617173ECD45DB384142E91B693492%40CY5PR19MB6171.namprd19.prod.outlook.com. |
Back to the Home of the Forward Look Network
Archive Sitemap