{Chrysler 300} Mirror and Bowden cable clios

[John Grady <jkg@xxxxxxxxxxxxxxxxx>]

hi 
Anyone have a solution to 57/58 mirror glass failure ( spots in reflective  back)  ?

not obvious how/ if it can be taken apart , metal looks factory crimped over glass edge ; has threaded stud on ball on back , all the new  mirrors I can find have a preassembled rod with ball on both ends , can't get our ring nut on  it . short of machining it somehow ( could be done?  threaded stud put into cut off rod?) — any answers ? repro subject ? Someone could set up to machine ? 

second , on all over our heater controls and Bowden wire controls there is snap on clip to hold outer jacket of the Bowden . Looks like a std item used by others too .
I cannot find a number or supplier ? anyone know? always missing one .   
thanks John g 

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/A00CC364-4722-43BB-92ED-F48AB750EB81%40gradyresearch.com.