{Chrysler 300} 300K passenger seat mechanism and a shout out to Bob Merritt

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Bob saved me from diving into a big hole on this one…

 

Turns out that one MUST have about 100 pounds on the electric seat mechanism for it work correctly in the up and down motion. The two round springs on the thing just place too much tension on the up-down screw jack ring gear without the weight being correct.

 

I placed a board on the unit on my bench and placed a flathead six cast iron head, a 300K torque converted and a RV2 compressor with bracket on the board then I tried the unit again. It goes up and down.

 

Learn something new every day.  A big thanks for Bob for the heads up.

 

James.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB617178BD34E47B656FA0010793152%40CY5PR19MB6171.namprd19.prod.outlook.com.