--Well, This carpet front is not all that good fit wise. The mold points versus the cut out points are not even close. I will have to ignore using the factory carpet to for hole cuts and do it in place the hard way. Also the tunnel fit is wrong. I have about two inches too much material. I will have to slit it along the top and turn the front into two sections. If I do that then the mold at the base of the tunnel and the pan looks good. What a pain on my bad back!
James
James
From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, January 26, 2025 12:57:43 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 300k carpet--I am installing the carpet as I write this. The front is much longer, before I cut the length, can anyone who has done a 63-64 with AAC carpet had the same long front. Looking for a reality check?
I lined the rear edge up as it is edged like the original.
James
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171FD1B81EBB5034E485FFB93ED2%40CY5PR19MB6171.namprd19.prod.outlook.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171E18929523CFFA0C00EA293ED2%40CY5PR19MB6171.namprd19.prod.outlook.com.
Back to the Home of the Forward Look Network
Archive Sitemap