To my knowledge the 426 street wedge appeared in B body cars only, never used in Chryslers. Best way to tell if it was ever even possible is to consult with the AMA specifications for the 1962 300 Danny Plotkin From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of Bill Werick In Number 182 news-flite, there is a table of 300 specifications and it includes, for just the 300H, the mention of a 426 wedge over the counter engine with a 12-1 compression ratio that produced 421 hp. I had never heard of this engine and I wonder whether there is a 300H out there with this engine. Bill Werick 14508 Chesterfield Lane Culpeper VA 22701 703-328-3034 . -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/002601db91c6%24aec638e0%240c52aaa0%24%40northeastretail.com. |