To my knowledge the 426 street wedge appeared in B body cars only, never used in Chryslers. Best way to tell if it was ever even possible is to consult with the AMA specifications for the 1962 300
Danny Plotkin
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx] On Behalf Of Bill Werick
Sent: Sunday, March 9, 2025 2:46 PM
To: 'Chrysler 300 Club International' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 426 300H
In Number 182 news-flite, there is a table of 300 specifications and it includes, for just the 300H, the mention of a 426 wedge over the counter engine with a 12-1 compression ratio that produced 421 hp. I had never heard of this engine and I wonder whether there is a 300H out there with this engine.
Bill Werick
14508 Chesterfield Lane
Culpeper VA 22701
703-328-3034
.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/04f501db9123%24801711c0%2480453540%24%40werick.com.
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
.
