
RE: Rear Seal Installation Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Rear Seal Installation Question
- From: Brian Schlump <brianjan_64@xxxxxxx>
- Date: Sat, 6 Feb 2010 15:59:54 +0000
Dennis, I recently bought a fully restored '68 Coronet R/T. When the
machine shop rebuilt the engine they used the seal that has the silicone
and pipe cleaner side seals. The rear main leaked like a sieve when the
car was delivered. The seller wouldn't warranty the work. I removed
the rear main seal and found that the silicone had not filled the top
3/8" on one side and the top 3/4" on the other side, even though the
pipe cleaners had been installed. I've never had problems with the
factory style side seals leaking in that area. I bought Mancini's rear
main seal replacement kit. It has 2 seals on each side. Probably
overkill for the application...Brian
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
Back to the Home of the Forward Look Network