Re: 63 Fury - 318 POLY - Outside diameter pinion seal

[wally breer <wbreer@xxxxxxx>]

===========================================================
Graduate in less than 13 months with AIU?s Online virtual 
campus. Classrooms and student service as close as your 
computer. Highly accredited, study anytime ? anywhere.
caab6anb7yoMza/ AIU
===========================================================



Hi
      Why would they need the Diameter of the pinion seal to determine the
axle seals??
Since if the car is bone stock the axle seals they are all the same ,only
the pinion seal changes . The inner axle seal is a Chicage Rawhide 15200
,the outer seal is a Chicago Rawhide 13500. You must pack the axle bearing
with grease prior to installation as they are not lubricated from the rear
axle supply,(use a good quality wheel bearing grease).
The seals are still available through the normal parts network.
FYI ,To determine the rear pinion diameter the best is to use the axle
housing casting number : 2070741 is a small pinion (1 3/8" ) ; 2070742 is a
large pinion (1 3/4" )
On some 63's the early housings were installed and these castting numbers
are as follows:
1820657 is a small pinion 1 3/8" ; 1634985 is a large pinion (1 3/4").

   Wally
    63 Dodge

----- Original Message -----
From: "Edward Lane" <elane352@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, April 06, 2004 9:18 AM
Subject: 63 Fury - 318 POLY - Outside diameter pinion seal


===========================================================
Sign up to get FREE information from leading colleges!
Compare degrees, admissions, financial aid and more.
Study your career education options at
Collegeinformation.info.
caab6aibWhYMBa/ College Info
===========================================================


Greetings!

Forgive me if this an ignorant question.

How can I determine the outside diameter of my pinion
seal on my rear brakes?  I am here at work (no manual
with me) and I honestly am not sure what the pinion
seal is.

The reason I am asking is that yesterday I placed an
order with Kanter to get rear bearings & seals, wheel
cylinders, etc.  They called back this morning.  They
need to know the outside diameter of my pinion seal.

My car is totally stock regarding the rear.  Does
anyone know what the diameter would be?  If so, please
email me @ elane352@xxxxxxxxx or
elane@xxxxxxxxxxxxxxxxx

I will check the FSM when I go home tonight.

E. Lane



__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/

===========================================================
Your opinion counts! We're conducting a survey for a
computer service/repair company. When you complete our
survey, you will also be entered into a drawing for one of
ten $100 prizes. Just click
caab6PVbWhYMBf/ Val Rad
===========================================================
----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

===========================================================
Your opinion counts! We?re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
caab6PVb7yoMzf/ Val Rad
===========================================================
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.