
RE:cam phasing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE:cam phasing
- From: threecarb65@xxxxxxx
- Date: Mon, 12 Apr 2004 14:16:17 +0000
===========================================================
Bounces like rubber! Shatters like ceramic! Discover Crazy
Aaron's Thinking Putty in grown up handfuls. It's the
creativity unleashing, mood enhancing desk toy!
caab7pJb7yoMza/ Crazy Aaron Enterprises
===========================================================
Big Don is exactly right,as usual! Working for years on all types of 4 stroke engines,it has become second nature to me.I have worked on engines with no timing marks and the old rule applies-TDC with the valves for that cyl split at the overlap,one more crank revolution and you are at TDC compression stroke,ready to install and time sparking coordinator {distributor}Stan
===========================================================
Your opinion counts! We?re conducting a survey for a
computer service/repair company. When you complete our
survey, you will also be entered into a drawing for one of
ten $100 prizes. Just click
caab6PVb7yoMzf/ Val Rad
===========================================================
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
b7yoMz.
Back to the Home of the Forward Look Network