RE: whats a RB engine weigh??

[Earl Helm <earlh@xxxxxxxxxxxxxx>]

===========================================================
Domains as low as $4.95! 
Limited Time! ICANN Accredited GoDaddy! 
caaccM5b7yoMza/ GoDaddy
===========================================================

Tom,

Good advice, I have a 2000lb stand and I even put a 2X4 under the pulley
at night.

Earl

Guy's,
I bought the big one from Summit this past winter and it sags.  I was so
afraid it would drop the engine I cut a 4x4 and put it under the
crankshaft pulley.  I also bought the roll around cradle for BB  and it
toppled over and bent with a 361 block on it last month.  The black one
with the little wheels.  Be careful, it's cheap stuff.  Thankfully I was
standing right there and put some dunnage down to break the engine's
fall and no damage that I can see, but DAMN!  I had just taken it off
the hoist and creak-creak-BANG!  I'm going to have to cross-brace the
cradle and the stupid little wheels get caught in every little crack in
the floor so I'm going to get 4 large rubber swivel casters.  Beware!
I'd advise buying something better.

Tom Duross

-

===========================================================
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caaccMPb7yoMzf/ UOP
===========================================================



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.