Re: B & RB oil pump gasket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: B & RB oil pump gasket



-----------------------------------------------------------
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caaciq1b7yoMza/UOP
-----------------------------------------------------------





In a message dated 6/3/2004 1:53:23 PM Eastern Standard Time, 
kwesterlund@xxxxxxxxxx writes:
Help!

I am putting my 440 back together and the FelPro gasket set I have
doesn't include the gasket for the oil pump.  The auto parts stores
around here are worthless when it comes to finding this gasket (what
ever happened to the good old auto parts stores).  

Can the pump be installed without a gasket using RTV or where can I get
the gasket?  Does anyone have a part number for it?  If so, they can
probably order it.

Thanks in advance,
Ken 

  Ken I would recomend that you DO NOT use RTV. That stuff has a nasty habbit 
of squeezing into the pan or oil gallery and plugging up the works. You can 
call Fel Pro and ask about a part number. What I have done in the past is make 
my own. You can get a sheet/roll of thin gasket material. Lay the pump on top 
of the material and trace the outline of the pump.You have to have a center 
hole for the oil pump shaft in the gasket material. When you have it cut out the 
flip the pump over lay the gasket back on the pump again and push your finger 
in the holes for the bolts and oil inlet/outlet. This will leave an 
impression in the gasket. Take the gasket lay it on a hard surface (steel is best) take 
a 1/4 drive socket (somewhere around 5/16 in size) line it up over the 
indentations and hit the socket with a small hammer with a couple of sharp blows. 
This will cut out a perfect circle for the holes needed. You just have to figure 
out which socket size is the right size for the hole. I have done this for 
all types of bolt ons and it works quite well in a pinch.
Bob

[Non-text portions of this message have been removed]

-----------------------------------------------------------
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today ? APPLY NOW! It's fast, easy and 
secure. 
caaciqQb7yoMzf/Discover Card
-----------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.