Re: 750 cfm carb

[Joeydahook9@xxxxxxx]

-----------------------------------------------------------
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today ? APPLY NOW! It's fast, easy and 
secure. 
caaciqQb7yoMza/Discover Card
-----------------------------------------------------------


  If you are running reasonable rpms, the 600 should be ok.  I've always used 
Edelbrocks and haven't had any problems.  They're pretty close out of the box 
and it seems I was always tinkering with Holley carbs I've used.  I have a 
600 edelbrock on my 460 Ferd because they didn't make a 750 when I built it.  
It's on a hunting rig and I haven't had a problem or had to adjust it after the 
initial install, course I could do without the 10 mpg....;-)  Joe

--
[Non-text portions of this message have been removed]

-----------------------------------------------------------
Let University of Phoenix make 2004 your year. Evening, 
weekend or FlexNet® classes ? over 130 locations. Look 
into our programs and get the degree that gets you going!
caaciq1b7yoMzf/UOP
-----------------------------------------------------------




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.