RE: sending unit ground

["Gary H." <62to65mopar@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Do you live vicariously through Reality TV? Let us know and win!
caacDv1b7yoMza/PermissionData
-------------------------------------------------------------------

"Bad shape" how? Rust? If so, you can treat it with Naval Jelly type 
stuff and clean it up & use it.

New reproductions of these ground clips were available last I looked, 
too.

Gary H.


Sean Bolter wrote:
> 
> The little metal clip that serves as the ground for my fuel sending unit 
> 
> is in really bad shape.  I was wondering, could I just use a piece of 
> electrical wire and two hose clamps to take its place?
> 
> thanks,
> 
> Sean B.

[AD removed for archives]
-------------------------------------------------------------------
Should School Prayer be mandatory? Give us your opinion and win.
caacDvTb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.