RE: engine ID

["Gary H." <62to65mopar@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Like music? Get a CD Player here
caacJzeb7yoMza/PermissionData
-------------------------------------------------------------------

I read somewhere that the 1968 383 V8 engine VIN is stamped on the 
driver's side upper rear of the block and 1969 383 V8 engine VIN is 
stamped on the bottom of the block right above the oil pan near the 
engine mount. Can't verify if that is correct, though.

Gary H.

Brent Stewart wrote:
> 
> a friend called me last night and was looking for the vin number on his 
> 383 
> block. is it located in the same place a 440 would be? he looked and 
> found 
> nothing. it was later that night that it dawned on me it was a 67 block 
> and 
> therefore no numbers were there to match as that was started in 68. is 
> the 
> 383 vin ID located behind the passanger engine mount real close to the 
> pan 
> surface on the bottom of the block? Thanks

[AD removed for archives]
-------------------------------------------------------------------
Claim your tickets to Universal Orlando now
caacJzlb7yoMzf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.