From: SCOTT OSTROWSKY <SMOSTROWSKY@xxxxxxxxxxx>
Reply-To: 1962to1965mopars@xxxxxxxxxx
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: PRIMING OIL PUMP
Date: Tue, 4 Jan 2005 19:35:13 -0500
[AD removed for archives]
-------------------------------------------------------------------
** Get Your Own Support-a-Cure Yellow Bracelet for $1.99 **
Show your support for finding cures for both AIDS & Cancer.
Get yours for just $1.99. This bracelet makes a difference.
caacYkkbV7tWJa/Penn Media
-------------------------------------------------------------------
Thanks for the info. Pulled the gear-hand primed and fired her up!
Thanks,
Scott
----- Original Message -----
From: "Dave Krugler" <dkrugler@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, January 03, 2005 10:31 PM
Subject: RE: PRIMING OIL PUMP
[AD removed for archives]
-------------------------------------------------------------------
We can reduce your unsecured credit card debt by 40-60%.
Don't file bankruptcy. Be Debt Free in as little as 1 year. Take
control of your situation. 100% FREE Consultation.
caacYksb6IRuka/KnockOutDebt
-------------------------------------------------------------------
Scott- I pull the drive gear off my max wedge engine every spring to prime
oil pump. It should be removable by removing the distributor then turning
the gear counter-clockwise to walk it up the cam gear. Then grab it with
an
expanding type snap-ring plier or soemthing similar and remove it through
the distributor hole in the block. You can then use a hex Mopar oil pump
priming shaft with a 5/16 socket on a speeder wrench handle ( I use 1/4"
drive stuff) and turn counter-clockwise. You will hear the oil begin to
fill galleries then feel resistance. Be careful to keep the priming shaft
centered. Do not let it drag on pump gear busing in block or you can
damage
the bushing as the priming shaft is hardened. You can pump 20-30PSI oil
pressure pretty easily with this method. You will then have to re-install
pump gear close to same orientation as it came out in to get distributor
back in in correct orientation. I mark distributor rotor to distributor
body, distributor body to block and oil pump drive gear to block when I do
this and am able to get distributor back in and very close to correct
timing.
>From: SCOTT OSTROWSKY <SMOSTROWSKY@xxxxxxxxxxx>
>Reply-To: 1962to1965mopars@xxxxxxxxxx
>To: 1962to1965mopars@xxxxxxxxxx
>Subject: PRIMING OIL PUMP
>Date: Mon, 3 Jan 2005 22:07:47 -0500
>
>[AD removed for archives]
>-------------------------------------------------------------------
>Get a Holy Bible for FREE!
>caacYkCbV7tWJa/PermissionData
>-------------------------------------------------------------------
>
>
>Hello-
>
> Hope everyone had a happy holiday!
>
>I fired up my Max wedge motor a few weeks ago and it sounds mean. I had a
>couple of leaks in the pan gasket and one of the freeze plugs. I pulled
the
>motor and while I had the pan off, I decided to put on a different oil
pan
>and pick-up. I put the motor back in and forgot that I wanted to take off
>the oil pump to push the drive gear out, so I could hand prime the pump
>upon reinstallation. Now the motor is ready to fire, oil is in and I
cannot
>prime the motor. I cranked the motor a little with the starter hoping for
a
>quick prime, no luck. What are my options. How can I get the pump primed
>with the least hassle. Cam I put oil in through the Oil filter
connection,
>keep cranking, can I pull the gear through distributor hole????
>
>Help-
>Scott
>[Non-text portions of this message have been removed]
>
>[AD removed for archives]
>-------------------------------------------------------------------
>Amazing Diet Patch
>The fastest - Easiest way to lose weight! Try it now FREE!
>caacYkHbV7tWJf/MyDietPatches
>-------------------------------------------------------------------
>
>----
>Please address private mail -- mail of interest to only one person --
>directly to that person. I.e., send parts/car transactions and
>negotiations as well as other personal messages only to the intended
>recipient, not to the Clubhouse public address. This practice will
protect
>your privacy, reduce the total volume of mail and fine tune the content
>signal to Mopar topic. Thanks!
>
>'62 to '65 Mopar Clubhouse Discussion Guidelines:
>http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
[AD removed for archives]
-------------------------------------------------------------------
** Get Your Own Support-a-Cure Yellow Bracelet for $1.99 **
Show your support for finding cures for both AIDS & Cancer.
Get yours for just $1.99. This bracelet makes a difference.
caacYkkb6IRukf/Penn Media
-------------------------------------------------------------------
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacYkHbV7tWJf/MyDietPatches
-------------------------------------------------------------------
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
Back to the Home of the Forward Look Network