Re: Temperature gauge or sender

[Gary Pavlovich <glpavlovich@xxxxxxx>]

Paul,
That is usually the problem but if you need a NOS sending unit, I may have a 
spare.
Gary Pavlovich
----- Original Message ----- 
From: "Schuyler Wrobel" <schuyler62@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, January 04, 2005 6:43 PM
Subject: Re: Temperature gauge or sender


> Hey Paul,
>
> the temp gauge on my 62 Dart Poly wagon stops working
> from time to time, and I just clean the contacts on the wire
> and sending unit and that brings it back, so far any way.
> sometimes just wiggling the wire on the sending unit is
> enough? It's a simple test, maybe you have already tried
> this, hope this helps .
>
> Schuyler
>
> Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
>  <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
>
> On Jan 4, 2005, at 1:36 PM, Skagdrager@xxxxxxx wrote:
> > Hey, All.
> > The temp gauge on my  62 Dart poly doesn't work. What tests do I perform 
> > to
> > tell if it's a bad gauge or a bad sending unit (heat sensor)? And if I 
> > test the
> > sending unit with a multi-meter, what values should a good unit be puting 
> > out
> > when cold and when hot.
> > Thanks for any help.
> > Paul
> > -----------------------------


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.