RE: 63 Dodge Dash

[Dave Krugler <dkrugler@xxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Show your pride with a free* USA T-shirt.  Click here to confirm 
your address.
caac2N5a/PermissionData
-------------------------------------------------------------------

Think it is pot metal which you would not have fun welding.  Why not cut 2 
pods and use 1" wide by 3/16 thick soft aluminum plates at the seams placed 
inside and joined with 10-24 aluminum screws.  Tap both the plates and the 
pod thru, goober up with JB Weld, insert screws either side of cut lines 
allow epoxy to cure then sand aluminum screws off flush with pod on outside, 
prime, sand, paint, looks perfect, won't come apart, stronger than before.   
I used the aluminum screw trick to restore the pod on my max wedge car which 
had about a million tach mounting screw holes on it.  After paint I will 
defy you to find the repairs on the finished outside of the pod...
> From: Don Wynn <herwig@xxxxxxxxxx>
> Reply-To: 1962to1965mopars@xxxxxxxxxx
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: 63 Dodge Dash
> Date: Mon, 17 Jan 2005 16:54:58 -0600
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Click here and get your free* stock car racing gift.
> caac2NQbV7tWJa/PermissionData
> -------------------------------------------------------------------
>
> I am thinking about building a custom dash by taking 2 housings and welding 
> them together to make it twice as long, so I can put all kinds of need 
> gauges,radio, gps etc. My problem is I don't want to cut things up until I 
> find out if the dash pod is aluminum  or pot metal. I can weld alum and not 
> pot metal. Please advise Don, herwig@xxxxxxxxxx or my office 800-643-9523
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.6.13 - Release Date: 1/16/2005
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Show your pride with a free* USA T-shirt.  Click here to confirm your 
> address.
> caac2N5bV7tWJf/PermissionData
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 

[AD removed for archives]
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
caac2NUf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


http:///u/?.