Re: Upper ball joint and control arm problem

["62-65-mail-list-club-Gary-H" <62-65-mail-list-club@xxxxxxxxxxx>]

New control arms are available. Here is one vendor; there may be other vendors who sell them too.

 https://p-s-t.com/i-23161401-upper-control-arms.html

Also see this ebay item

"1962 - 1974 Mopar Chrysler B and E body upper control arms Charger Challenger" is the title.
But the listing itself contradicts that with "fits the following cars.
1965-1969 Belvedere, 1965 -1972 Satellite, 1968-1972 Road Runner, 1967-1971 GTX, 1965-1972 Coronet, 1968-1971 Super Bee, 1966-1972 Charger, 1969 Daytona, 1970 Super Bird, 1970-1974 Barracuda, Challenger." 

https://www.ebay.com/itm/235130177319 

For used versions perhaps a member here may have one; I guess you can check with Joe Suchy  too.

https://1962to1965mopar.ornocar.com/temp/joesuchybcard.jpg

Hope this helps. 
 
Thanks,
Gary H.

 

>  -------Original Message-------
 
>  
>  I'm rebuilding the front-end on my '64 Dodge.  The driver's side went
>  fine, and I'm putting the passenger side back together this afternoon.
>  The upper ball joint has stripped out its hole in the control arm way
>  before the 125 ft-lb the manual calls for.  What are my options at
>  this point?
>  
>  Does anyone have a stock pass-side control arm they're willing to part
>  with?  Does it work to weld them together (top or bottom side?)
>  Something else?
>  
>  -- Tony  brummett@xxxxxxxxx
>  '64 Dodge 400
>  '65 Dart wagon
>  
 

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20240909031931.29006.qmail%40server309.com.