RE: break system problem....master cylinder v/s calipers

["Gary H." <62to65mopar@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get a FREE* MP3 Player - yours to keep! Click Here Now!
caadeMpbOyW3Na/MP3 Player Giveaway
-------------------------------------------------------------------

Put a scrap piece of wood (2x4) under the brake pedal to keep the pedal 
from bottoming out.

Gary H. 

Menko Johnson wrote:
<snip> 
> Also on the previous post, re: bleeding the brakes.  Is that common to
> stop the pedal from going all the way to floor when bleeding?  I've
> always pressed the pedal as far as it would go when bleeding
> previously, and wanted to make sure I'm not doing it wrong.
> 
> Thanks!
> 
> MJ

[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadeMjbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.