If the pedal is hard you probably have a bad booster. Or else the valve from the booster to the vacumn hose that goes to the manifold is bad. Also did you hook up the hose to the manifold?
MOPAR413 (Gary) 64 Polora 500
From: Menko Johnson <menkoj@xxxxxxxxx> Reply-To: 1962to1965mopars@xxxxxxxxxx To: 1962to1965mopars@xxxxxxxxxx Subject: Re: break system problem....master cylinder v/s calipers Date: Tue, 8 Mar 2005 11:04:34 -0500
Does this mean he may need to adjust the length of the pushrod?
Also on the previous post, re: bleeding the brakes. Is that common to stop the pedal from going all the way to floor when bleeding? I've always pressed the pedal as far as it would go when bleeding previously, and wanted to make sure I'm not doing it wrong.
Thanks!
MJ
On Tue, 08 Mar 2005 15:36:42 +0000, pablo <jpdart@xxxxxxxxxxx> wrote:
> I´m using a power booster. (I really don´t know if the disc MC is different
> from a DRum MC)....but the pedal feels a little hard.
_________________________________________________________________
On the road to retirement? Check out MSN Life Events for advice on how to get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Start your free 14-day trial today!
caadfBPbNHQrtf/Nexiderm
-------------------------------------------------------------------
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
bOyW3N.