Re: Distributor recap long read

[Dave Casey <dcasey@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get a FREE* 5 Megapixel Digital Camera - yours to keep!
caadeMobOyW3Na/5 Megapixel Digital Camera Promotion
-------------------------------------------------------------------

There's a busihng that goes between the breaker plate (the plate that moves 
from vacuum advance) and the plat below it, which is solidly mounted to the 
distributor housing. This bushing is probably worn, causing the gap 
variances you described. Try pulling it apart to see what you have. Should 
just be an "E" clip holding the breaker plate on at the bushing.

Dave Casey 

[AD removed for archives]
-------------------------------------------------------------------
2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started 
Now!
caadeMnbOyW3Nf/TaxBrain
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.