RE: new turn signal socket

[Scott Mirabella <jmirab2972@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Help us support US Troops ? Just Register Here.
caadtaMbOyW3Na/Permission Data
-------------------------------------------------------------------

I worked on my turn signal problem tonight, drivers side wouldn't blink 
just stayed on. Passenger was fine. I took the flasher from my 1 ton 
truck and put in the 64' and both sides blinked, although the front 
drivers side did'nt work. Two questions 1. How do you remove the socket 
from the front bliker housing? Does it twist out? Mine is stuck, and 
needs to be replaced. 2. why would they work with the heavy duty flasher 
and not the passenger unit? Thanks
Sean Bolter wrote:
> 
> Hey, All,
> 
> The 1157 bulb for the front turn signal on my 1964 Fury burned out, and 
> it was rusted and fused tight.  I ended up destroying it.  However, 
> after much searching, I found a two-wire socket at NAPA that snaps in 
> like Mopar made it!
> 
> Part number:  LS6252
> 
> I was so pleased with this, that I replaced the other side, too.  It 
> will probably fit other years as well, but I can only vouch for 1964.
> 
> Sean Bolter



Scott Mirabella
64 fury vert
383 4speed
LongIsland, NY

[AD removed for archives]
-------------------------------------------------------------------
Save up to 75% on luxury bed & bath! Luxury sheets, duvets,
down comforters, plush towels & more woven from the finest
materials -- 400, 600, 1000 thread count & more from $29.99!
caadt4AbOyW3Nf/SmartBargains
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.