RE: 4 speed trans mount on 1963 SPort fury

["Gary H." <62to65mopar@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get $1,000 to spend on groceries? any way you please. Click here!
caadAcAbOyW3Na/GrocerySpree
-------------------------------------------------------------------

B body T-10 and A-833 4 speeds up to 1965 used a transmission mount with 
two lower studs. 1966 to mid-71 used a single stud mount. In mid 1971 a 
spool mount was introduced in B body cars. 

Thanks,
Gary H.


Derrick Brown wrote:
> 
> hi,
> does anyone know?  im sure many here do.
> running a 63 sport fury original 383 , 4speed.
> the trans and motor in the car when i got it are 70/71 vintage.   
> 833trans/440hp.
> 
> a new trans mount is needed at the crossmember.  would the past owner  
> have had to change the trans crossmember to use the newer 4speed?  or  
> would the newer 4 speed bolt right up to the older trans crossmember?
> therebye all using the same rubberized  trans mount?
> 
> any hints would be greatly appreciated.
> 
> Derrick
> derrickb@xxxxxxx
> '63 Sport Fury
 

[AD removed for archives]
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
caadzTWbOyW3Nf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.