RE: huh?? distributor mystery for Neil

[Robert neal zimmerman <northwestweirdo@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get $1,000 to spend on groceries? any way you please. Click here!
caadHlsbOyW3Na/GrocerySpree
-------------------------------------------------------------------

well long story short its still got me confused.
   In effect if I follow the manual and have the  intermediate shaft 
   pointing the correct way and wire up the cap  as per manual u
   basically cant turn the distributor far enough to get it to run right
   because the vacumn advance canister hits the coil.
   I triple checked my points, they are gapped perfect at .017 and dwell
   is right on with what the boook says.
   Now this  all could be corrected if I lifted the intermediate shaft
   and moved it by a tooth , that would probably  give me enough swing
   room around the coil.
   So i currently have it running with the  plug wires  shifted
   counterclockwise by one hole.
    It works but it drives me crazy as i am the kind of guy  who wants
    to know why all the time.
     As an interesting footnote  a guy at the parts house says he has
     heard of this before on the LA small blocks, and also i was looking
     at a close up  photo of a 340  in a  book and the guy in the photo
     had the  plug wires set up the same way .
    Its driving me crazy , I am going to light the car on fire after
    work tonite and push it over a cliff.
   Neal Zimmerman, Eugene 

-- 
http://www.fastmail.fm - Choose from over 50 domains or use your own

[AD removed for archives]
-------------------------------------------------------------------
Get up to $1500.00 Fast and Easy!
No Credit Checks! No Paper Hassles! Nothing To Fax!
Apply Online and We'll Contact You Within the Hour!
caadHk7bOyW3Nf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.